Nearly 1.35 million people annually lose their lives in car accidents worldwide. Three thousand two hundred eighty-seven deaths every day, and 25 million more are harmed or disabled as a result. At 1.49 deaths per 100,000 people, Singapore has a high rate of road fatalities, where several deaths occur for every 100,000 persons.
It is why more companies are investing in advanced driver assistants, and one of those is a blind spot detection sensor. By alerting drivers with warning signs or taking automatic steps for cars when those vehicles are in a collision risk zone, it aims to prevent collisions altogether or mitigate their severity.
What Is The Function Of Blind Spot Monitoring Systems?
The term blind spot describes the part of your field of vision blocked by an object directly over your shoulder. Vehicles and other hazards can lurk in this blind spot, increasing the risk of a collision or other disaster if you fail to see them in time.
A blind spot monitoring system allows you to monitor what’s happening up to 10 feet behind and beside your car. These sensors monitor the area for approaching vehicles and provide visual and auditory warnings to the driver. A red or yellow light in the side mirrors serves as the warning signal. In some systems, the wheel and the driver’s seat may move as an added sensory warning.
The simplest of these systems consists of radar or ultrasonic sensors installed in the bumpers on both sides of the vehicle’s trunk. These sensors will alert you when a car in the next lane approaches from behind.
If a blind spot monitoring system detects a car approaching from behind, it will alert you that the adjacent lane is blocked. The alarm is often displayed on the outside rearview mirror of the concerned side of the vehicle. Alternatively, it could appear on your car’s A-pillar or driver information screen.
Why Do You Need A Blind Spot Monitoring System?
Some of the most significant benefits of a blind spot detection system include:
- Extensive security measures are in place
- Lessening of truck and automobile crashes or collisions
- Ability to switch lanes safely both in urban settings and on the highway
- Accurately report on traffic in the blind spot.
Like having a driver monitoring system, it keeps a tab on the driver and the vehicle. Manufacturers first included blind spot monitoring in expensive luxury vehicles, but it has already made its way down to more affordable models. If it isn’t already built-in, it is likely to be offered as a separate upgrade or as part of a larger package of upgrades.
Your blind spot will increase in proportion to the size of your car. BSM is more effective at preventing lane changes into oncoming traffic the larger the blind spot.
When a vehicle is equipped with a blind spot monitoring system, it can gently steer away from the lane marker on its monitoring side. The system may gently guide you back into the middle of your lane.
Is Blind Spot Monitoring System Worth Your Money?
If you need a driver fatigue management solution, you can rely on a blind spot monitoring system to keep you safe on the road. The device has the potential to be very helpful and save lives by preventing accidents.
With many automakers opting for slanted roof lines and smaller side windows in the name of style, these kinds of safety features are becoming increasingly important. Like investing in a vehicle tracking system in Singapore, it provides real-time alerts.
However, those more concerned with saving money may look down on this technology, and they would be right to point out that drivers have managed without it for decades.
On the other hand, having a blind spot detection sensor could be well worth the cost if you’re planning to make the upgrade. It is especially applicable for businesses that handle large vehicles.
How to Get the Most Out of Your Blind Spot Detection System?
As mentioned, you may have been on the road for quite some time without installing a blind spot detection sensor. However, there are a few easy actions you may take to become accustomed to this new safety feature:
1. Clean the sensors
Wipe off the sensors and lenses of any debris that could prevent them from working effectively, such as dust, mud, snow, etc. Inspect their cleanliness at regular intervals and clean them as needed.
2. Test drive your car
Make sure your automobile is in good working order by giving it a few test drives before taking a long trip. Even if you have a driver monitoring system to support and guide you, it’s important to practise switching lanes and becoming accustomed to the technology to feel comfortable using it on the highway.
3. Adjust your rearview mirror properly
Adjust the rear view mirror’s position so you can see the back windshield. Doing so prevents you from making jarring movements of the head or body to check your rearview mirror.
4. Follow the instructions
Read the instructions when deciding how to set up a blind spot monitoring system. How to activate and adjust active driver assistance features is covered in detail in every manual. You will be able to know how it works and how you can be able to utilise additional features.
5. Position the driver’s seat
You need to take the wheel and set the controls to how you normally operate your car. Ensure the seat and wheel are adjusted to be in a good driving position and can easily reach the car’s brake, gas, and shifter.
6. Learn the parameters of the system
Recognise the constraints of the platform you’re using. A blind spot monitoring system has various types, each with its qualities, and each feature may only work depending on your vehicle. Every blind-spot detection technology fails to identify pedestrians, bikers, and animals.
Upgrade your fleets with the help of Guardian South East Asia
With the help of a blind spot detection sensor offered by Guardian South East Asia, your drivers can perform their jobs more safely and effectively, reducing the likelihood of accidents on the road. Request a demo today!
